Smartest Home
Qubino Z-Wave 1D Relay|Qubino Z-Wave 1D Relay Enlarge

QUBINO Z-Wave 1D Relay

$95.00

Stock: Available

Product Code: DHS-LIT-SWW-QUB-01D

The QUBINO 1D Relay Plus (by GOAP) is a single channel wireless Z-Wave relay with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A.

PRODUT MANAUL

Product Description

Product description 

Qubino 1D relay connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve range and stability of your Z-wave network. The module can be controlled either through Z-wave network or through the wall switch manually.
This module is designed to be mounted  behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

qubino 1D relay in hand

Supported switches:

Module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

qubino 1D relay Garage door

With Qubino Flush 1D Relay you can wirelessly control your garage door, gate or entrance door of different power supply (110-240 VAC or 24 VDC). Use it to manage your gas water heater or as an intermediary that sends a PV signal to your heat pump, so it starts using photovoltaics energy and heating water to a higher temperature.

Product Details

• Compatible with any Z-Wave Controller.
• Dimensions (W x H x D) 41.8 x 36.8 x 15.4 mm
• Power monitoring accuracy P=5-50W, +/-3W; P˃50W, +/-3%;
• Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125°C
• Support for the connection of digital temperature sensor (optional part)
• 2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc, …

Product Support

On/Off Flush Relay Switch with dry contacts capable of operating a load of up to 10A.

Extra Features

The QUBINO Flush 1D Relay includes extra features to make it even more useful in your home automation system.

Temperature Sensor

Using an optional temperature sensor, the QUBINO Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems.

Binary Switch and Sensor Input

The Relay can be used with up to three external switches enabling it to control other Z-Wave devices by Association or Trigger Scenes in the main controller.

Strengthens Z-Wave Connectivity

The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.

The QUBINO Flush 1D Relay Plus is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information.

Technical Specification

Product Name 
 Flush 1 relay
Powered by
24V DC or 240V AC
Operation Range
30m
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
-10 -+40 C*
Measured temperature range 0,50 C (within 0o C - 40o C range) (optional sensor)
Temperature measuring accuracy
0,5 C
Housing
ABS
Dimensions (W x H x D)
41.8 x 36.8 x 15.4 mm

Installation

Requires 3-wire (including neutral) installation.
Works with AC or DC power supply (110-230V AC or 24-30V DC). Extra switch inputs for controlling additional associated devices or 2-way installations.

Qubino 1D relay wiring diagram


TOP