Smartest Home
Flush Dimmer 0-10V|Flush Dimmer 0-10V Enlarge

QUBINO Z-WAVE DIMMER 0-10V

$98.55

Stock: Available

Product Code: QUBINO Z-WAVE DIMMER 0-10V

Are your lights powered by a LED driver 0-10V? Are you looking for a solution to control them wirelessly, using your smartphone from your comfortable sofa?
Qubino Flush Dimmer 0-10V gives you an opportunity to connect your lights, running on
0-10V, to a smart home system and control them wirelessly.

PRODUCT MANUAL

Product Description

Technical specifications

Power supply 12 - 24 VDC
Max. sinking control voltage -20 / +20 VDC
Max. sourcing control voltage 0 - 11 VDC
Accuracy <3% FS
Max. sinking current 2 mA
Max. sourcing current 7 mA
Digital temperature sensor range
(sensor must be ordered separately)
-25°C~+80°C
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm
(packaging) (79 x 52 x 22)
Weight (including packaging) 28 g (34 g)
Electricity consumption 0.5 W

Supported Z-Wave Frequencies

ORDERING CODE FREQUENCY
ZMNHBD1 868.42 MHz
ZMNHBD2 921.42 MHz
ZMNHBD3 908.42 MHz
ZMNHBD4 869 MHz
ZMNHBD5 916 MHz
ZMNHBD8 865.2 MHz

Configuration parameters

Parameter no. 1 – Input switch type

Available configuration parameters (data type is 1 Byte DEC):

  • default value 0
  • 0 - mono-stable switch type (push button) – button quick press turns between previous set dimmer value and zero)
  • 1 - Bi-stable switch type
  • 2 - Potentiometer (Flush Dimmer 0-10V is using set value the last received from potentiometer or from Z-Wave controller)
  • 3 - 0-10V Temperature sensor (regulated output)
  • 4 - 0-10V Illumination sensor (regulated output)
  • 5 - 0-10V General propose sensor (regulated output)
Parameter 11 - Qubino

Parameter no. 11 - Automatic turning off output after set time

Available configuration parameters (data type is 2 Byte DEC):

  • default value 0
  • 0 - Auto OFF disabled
  • 1 – 32536 = 1 second – 32536 seconds Auto OFF enabled with define time, step is 1 second.
Parameter 12 - Qubino

Parameter no. 12 - Automatic turning on output after set time

Available configuration parameters (data type is 2 Byte DEC):

  • Default value 0
  • 0 - Auto ON disabled
  • 1 – 32535 = 1 second – 32535 seconds Auto ON enabled with define time, step is 1 second.
Parameter 21 - Qubino

Parameter no. 21 – Enable/Disable Double click function

If Double click function is enabled, a fast double click on the push button will set dimming power at maximum dimming value. Available configuration parameters (data type is 1 Byte DEC):

  • Default value 0
  • 0 – double click disabled
  • 1 – double click enabled
Parameter 30 - Qubino

Parameter no. 30 - Saving the state of the device after a power failure

Available configuration parameters (data type is 1 Byte DEC):

  • default value 0
  • 0 – Flush Dimmer 0-10V device saves its state before power failure (it returns to the last position saved before a power failure)
  • 1 – Flush Dimmer 0-10V device does not save the state after a power failure, it returns to "off" position.

Parameter no. 60 – Minimum dimming value

Available configuration parameters (data type is 1 Byte DEC):

  • Default value 1 = 1 % (minimum dimming value)
  • 1- 98 = 1% – 98 %, step is 1 %. Minimum dimming values is set by entered value.

Note: The minimum level may not be higher than the maximum level! 1 % min. dimming value is defined by Z-Wave multilevel device class.

Parameter no. 61 – Maximum dimming value

Available configuration parameters (data type is 1 Byte DEC):

  • Default value 99 = 99 % (maximum dimming value)
  • 2- 99 = 2 % – 99 %, step is 1 %. Maximum dimming values is set by entered value.

Note: The maximum level may not be lower than the minimum level! 99 % max. dimming value is defined by Z-Wave multilevel device class.

Parameter 63 - Qubino

Parameter no. 65 – Dimming time (soft on/of)

Set value means time of moving the Flush Dimmer 0-10V between min. and max. dimming values by short press of push button I1 or controlled through UI (BasicSet). Available configuration parameters (data type is 2 Byte DEC):

  • Default value 100 = 1 s
  • 50 - 255 = 500 mseconds – 2550 mseconds (2,55 s), step is 10 mseconds
Parameter 63 - Qubino

Parameter no. 66 – Dimming time when key pressed

Time of moving the Flush Dimmer 0-10V between min. and max dimming values by continues hold of push button or associated device. Available configuration parameters (data type is 2 Byte DEC):

  • Default value 3 = 3 s
  • 1 - 255 = 1 second – 255 seconds

Electrical diagram

+ +VDC (12-24 VDC)
- GND
AO Analog Output 0-10VDC
I1 Input for push button/switch/potentiometer or 0-10V
TS Terminal for digital temperature sensor (only for Flush Dimmer 0-10V device compatible digital temperature sensor, which must be ordered separately).
S Service button (used to add or remove device from the Z-Wave network)

Package content

1 device + 1 user manual
Practical blister packaging ensures lower cost of delivery.
Package dimensions (WxHxD): 79 x 52 x 22 mm
Gross weight (including packaging): 34 g

TOP